1. Connect power to the modem.
a. Ensure that you have at least two bars of WiMax signal on the modem display, (See instructions on How do I position my modem to get the best signal here.)

2. Connect an Ethernet cable from your CLEAR Home Modem to the CLEAR Voice Adapter.

3. Connect a second Ethernet cable from the CLEAR Voice device directly to the Ethernet jack in your computer.

4. Connect power to the CLEAR Voice Adaptor.

5. Turn on your Computer

1. Connect power to your CLEAR Home Modem.
a. Ensure that you have at least two bars of WiMax signal on the modem display, (See instructions on How to Reposition your modem to get the best signal here.)

2. Connect an Ethernet cable from your CLEAR Home Modem to the CLEAR Voice ATA.

3. If using a stationary, NON-WIRELESS ROUTER: Connect a second Ethernet cable from another port in your router directly to the Ethernet jack in your computer.
a. Repeat this step for any additional stationary computers you wish to add to network.
b. Note: You can usually connect several computers directly from a non-wireless router. The number of hardwired computers you are able to add is dependent on how many Ethernet ports are built into the router itself.

4. If you are using a WIRELESS ROUTER:

Ensure you have a wireless computer or wireless card installed

5. Connect the power to the WIRELESS ROUTER.

6. Turn on your CLEAR Voice ATA

7. Turn on your computer(s)
a. Get instructions on finding the strongest signal in your location here:
How to Reposition your modem to get the best signal b. Configure your computer to connect to your wireless network.